stability-chambers

Stability Chambers

Availability: In Stock

Category: .

The REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements

These freezers are available in standard & GMP versions.

Product Description

Remi-Cabinet-Stability-Chambers

Performance of Remi-Cabinet-Stability-Chambers

  • Designed as per ICH guidelines to meet, WHO and USFDA requirement
  • Fulfills storage conditions of 25⁰C – 60% Rh, 40⁰C – 75% Rh, 30⁰C – 65% Rh, 25⁰C – 40% Rh
  • Precise monitoring of temperature and humidity conditions
  • Comply with GMP requirements
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit
  • Heating by long life SS tubular heaters
  • Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines

Leading Technology Remi-Cabinet-Stability-Chambers 

  • Microprocessor controller with LCD display & capacitance type sensor for precise control of temperature and humidity
    4 Inch attractive LCD display for direct display of humidity & temperature
  • Battery Backup for Controller – 12 V, 7.2 Ah sealed maintenance free, Fully charged battery runs for more than eight hours
  • Automatic Calibration of set parameters
  • Self-Diagnosis for errors
  • Power failure and resumption recorded with date and time
  • Machine filled PUF insulation to eliminate void pockets
  • Unique design of thermal barrier for better energy efficiency
  • Hermetically sealed Compressor with CFC free refrigerant

 

User Freindly Features of Remi-Cabinet-Stability-Chambers

  • Histogram format of 24 hours temperature and humidity recording
  • Settable High / low alarm points with date and time
  • Memory for storage of up to 1000 records
  • Centronic interface to record Temperature, Humidity, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Chamber calibration port on side
  • Adjustable trays
  • PC communication with RS-485 and software complying to 21 CFR part 11 as per USFDA guidelines (Optional)
  • Remi Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelins (optional)
  • Data logger for 8 Point (4 + 4) temperature / humidity recording with sensor, printer interface and software (Optional)Safety Features of Remi-Cabinet-Stability-Chambers
  • Low water level alarm and power cutoff of boiler tank heater
  • High temperature safety cut off & alarms for high/low set parameters
  • Electrical circuit breaker
  • Time delay for compressor switch on
  • Overload cut off relay for compressor

Specifications:

SC-6 Plus SC-10 Plus SC-12 Plus SC-16 Plus SC-19 Plus SC-28 Plus SC-35 Plus
Internal Volume (Liters.) 200 280 370 450 540 800 1000
Number of Shelves 2 3 4 5 6 6 7
Internal Dimensions W x D x H (mm) 660 x 655 x 450 660 x 655 x 650 660 x 655 x 850 660 x 655 x 1050 660 x 655 x 1250 800 x 800 x 1250 800 x 800 x 1580
External Dimensions W x D x H (mm) 800 x 1095 x 1020 800 x 1095 x 1220 800 x 1095 x 1420 800 x 1095 x 1620 800 x 1095 x 1820 960 x 1370 x 1950 950 x 1370 x 2270
Temperature Range & Accuracy 10°C to 60°C, ± 1°C
Humidity Range (Rh) & Accuracy 40% to 95%, ± 3%
Temperature & Humidity control Microprocessor with Capacitance type sensor
Display 4″ LCD Screen, Large size Display for ease of reading
Power Failure Alarm  Audio Visual Alarm
Door Open Alarm Audio Alarm in case door open for over one minute
Humidity/Temperature Variation Alarm Set Humidity ± 3% Rh, Set Temperature ± 2°C, Audio Visual Alarm
Illumination 8 Watts Fluorescent Lamp
Internal Body Material Stainless Steel – 316 grade
External Body Material Stainless Steel – 304 grade
Insulation 80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise Level Less Than 65 db(A)
Recommended Voltage Stabilizer VS-04 VS-07 VS-07
Electrical 220-240 volts, 50Hz, Single Phase

Reviews

There are no reviews yet.

Be the first to review “Stability Chambers”